How To Setup Local Network On HA Tunnel Plus – Simple Guide

If you’re looking for a reliable and easy way to set up a local network on your Ha Tunnel Plus device, we’ve got the guide for you.

In this article, we’ll show you how to connect your Ha Tunnel Plus to your router and configure it so that it becomes your default gateway.

We’ll also give you instructions on how to set up DNS and Wi-Fi on your Ha Tunnel Plus, so that you can start using it as your own personal network.

If you’ve got a router, this process is simple and straightforward. If you don’t have a home router, however, setting up your Ha Tunnel Plus will be a little bit more difficult.

You can connect your device to your router with either an Ethernet cable or Wi-Fi.

What Is A Ha Tunnel Plus?

The Ha Tunnel Plus is a small, discreet, and affordable network router that can help you set up a localized network.

This device connects to your home’s internal internet service provider (ISP) via an Ethernet cable, and then broadcasts your local network over the public internet.

This way, you can access all of your devices on your local network without having to worry about using public Wi-Fi or hotspots.

Additionally, the Ha Tunnel Plus features ethernet port for connecting additional devices, as well as two USB ports for sharing files or printing.

Setting Up Your Network: Connecting Devices

If you’re not familiar with setting up a network, it may be a good idea to get started before reading any further. In this article, we will show you how to connect devices and set up a local network on the HA Tunnel Plus.

To start, unpack your HA Tunnel Plus and locate the power cord. Plug in your device and wait for the light on the front of the unit to turn green.

Once connected, press the power button on your device to turn it off.

Next, remove the protective film from the tunnel face plate by gently rubbing it away with your fingers.

Peel back one corner of the cover and insert one end of the Ethernet cable into one of the ports on the tunnel face plate.

Push down on both ends of cable until they snap into place. Repeat these steps for each port. You can now connect your device to the HA Tunnel Plus.

You should see a message on the device’s screen when it is connected, indicating that it has joined the network.

Configuring Your Router: Basic Settings

Routers are devices that allow for the forwarding of data packets between networks. Routers come in a variety of shapes and sizes, and can be used to connect one or more local area networks (LANs) together.

how to setup local network on ha tunnel plus

Routers can also be used to extend an existing LAN beyond its original boundaries.

When configuring your router, it is important to take into account the type of network you are connecting it to.

For example, if you are connecting your router to a broadband modem/router, then you will probably want to set up your router so that it acts as a gateway (providing access to the internet from within your home).

If you are connecting your router to a wireless network, then you will probably want to use WPA or WEP encryption to secure the connection between your router and other devices on your wireless network.

If you are connecting to an existing LAN, then you will probably want to use a wired connection between your router and the other devices on the network.

If you are using a DSL modem or cable modem, then you may not need to configure any special settings on either device.

Configuring Your Computer: Sharing Files And Printers

Configuring your computer for sharing files and printers can be a daunting task, but it’s relatively simple with the help of a few tools.

To begin, open up your computer’s system tray and click on the “Network” icon. From here, you can configure your computer to work as a networked device by selecting the appropriate network adapter from the list.

Once your computer is connected to the network, you can start sharing files and printers by following these steps:

First, open up Windows Explorer and navigate to the location where you want to share the file or printer.

Next, right-click on the file or printer and select “Share this item…” from the menu that pops up.

The next step is to enter the password that you want to share the file or printer with. Once you have done this, your computer will prompt for a folder name for the shared item.

The next step is to create a folder for the shared item. The final step is to share the newly created folder with the other users on your PC.

Your computer will prompt you for a name for the shared item and then it will be shared with everyone else on your network.

Configuring Your Laptop: Connecting To The Internet

Configuring your laptop for internet access is a fairly easy process, assuming that you have already configured your laptop for wireless networking.

If you have not done so yet, please follow the instructions in our article, How to setup your laptop for wireless networking.

Once you have completed those steps, all you need to do is connect your laptop to the local network.

The most common way to do this is by connecting via a wired connection to your router. If your laptop has a built-in Ethernet port, you can use that.

Otherwise, you will likely need to purchase a USB Ethernet adapter or a separate wireless-N router.

After connecting your laptop to the local network, open up the Windows Control Panel and select Network and Internet Connections.

In the window that opens, select the connection that represents your local area network (LAN).

Tips For Maximizing Your Ha Tunnel Plus Experience

If you’re one of the millions of people who use the Ha Tunnel Plus app on your mobile device, chances are you’re familiar with its features. But if you’re not sure how to maximize your experience, here are a few tips:

1. Make sure your device is connected to the same network as your router. Ha Tunnel Plus works best when both devices are on the same network.

2. Use a strong password for your router’s administrative account. This will help ensure that no one else can access your router’s settings or modify traffic flows through the device.

3. Try switching to basic mode if you don’t need some of the more advanced features offered by Ha Tunnel Plus.

In basic mode, all traffic is routed through the tunnel instead of individual applications and websites being redirected through it. You can also try toggling the advanced features on and off to see if that helps.

4. Try restarting your device, or switching it off and on again. This will often help with getting the software up and running properly.

5. Try reinstalling the application. This will often resolve problems with connectivity, as well as restoring some of the settings you may have changed on your router.

6. If you’re running the application on a device other than your main one, try changing the device’s IP address in settings.


Are you having trouble connecting to your local network on a Ha tunnel plus? There are a few things you can do to troubleshoot the issue.

1. Double check that your router is correctly configured. Make sure that the IP address of your Ha tunnel plus is listed in the “Forwarding and Remote Access” section of your router’s settings.

2. Check that your cable connection between your router and computer is properly connected. Make sure that the cables are plugged into both devices and not just one of them.

3. Try restarting both devices involved in the connection issue. This can sometimes fix problems with routers and computers not recognizing each other after being used for an extended period of time.

4. If all else fails, try using a different computer or router to connect to your network, if possible.

5. If you want to check if your computer is connected to the network, right click on the network icon in your tray and select “View Network Status”.

6. You can also try using a different browser to access your router settings page.


Q. What is a Ha Tunnel Plus? 

A. A Ha Tunnel Plus is a router that plugs into the back of your modem and allows you to create a local network on your home network.

This local network can be used for gaming, streaming, and other activities that require access to the internet from within your home.

Q. How do I set up my Ha Tunnel Plus? 

A. To set up your Ha Tunnel Plus, first plug it into an open outlet in your home. Then connect your computer to the Ha Tunnel Plus with an Ethernet cable.

Finally, connect your modem to the Ha Tunnel Plus. The Ha Tunnel Plus will automatically configure itself and add your computer to its network.

Q. Is there anything else I need to set up my Ha Tunnel Plus? 

A. There are no additional setup requirements for using a Ha Tunnel Plus.

Q. Is there a limit to the number of devices that can be connected to the ha tunnel plus?

A. There is no limit to the number of devices that can be connected to the HaltiHA Tunnel Plus. This means that you can connect your computer, gaming console, smart TV and more.

Additionally, you can also connect a variety of peripherals such as printers and storage devices.

Q. Can I use the ha tunnel plus with my current broadband service?

A. You will need to set up a password for your router and create a wireless network name (SSID). Make sure that you select “Ha tunnel plus” as the network type when configuring your wireless settings.

Once everything is set up, you are ready to enjoy all of the benefits of the Ha tunnel plus!

Q. What are the benefits of using the ha tunnel plus?

A. When it comes to home networking, the Ha-tunnel Plus is a great solution for anyone looking to get started quickly.

This tiny device plugs into any power outlet and can act as a bridge between your home network and the internet.

The Ha-tunnel Plus also includes a built-in wireless access point, so you can easily connect devices like smart TVs and gaming consoles to your home network.

Overall, the Ha-tunnel Plus is a great option for anyone looking for an easy way to get up and running with their own local network.

Q. Are there any restrictions on what devices can be used with the ha tunnel plus? 

A. Looking to setup a local network on your Ha Tunnel Plus? There are no restrictions on what devices can be used, as long as they’re compatible with the Ha Tunnel Plus’ wireless network and have the appropriate software installed.

Here’s how you can get started:

1. Connect your devices to the Ha Tunnel Plus’ wireless network.

2. Install the appropriate software on each device.

3. Open the app on each device and connect to the Ha Tunnel Plus’ network.

Q. Is there a warranty provided with the ha tunnel plus?

A. The device comes with a one-year warranty which covers manufacturing defects. The customer should first contact the company’s support team to report any issues they are experiencing.

If the problem cannot be resolved through customer service, the customer can then send the device in for repairs or replacement.


If you’re like most people, you likely use your home internet connection to access the internet and a variety of other devices in your home.

But what if you want to take your network offline for a quick project or travel? Setting up a local network on your Ha Tunnel Plus is simple and can save you some serious money.

The Ha Tunnel Plus is a nifty little device that essentially turns any TV into an online streaming device.

You can use it to watch live TV, record shows, or play games without having to rely on over the air broadcasts or cable networks.

Leave a Comment